OubaiboSlip rings

    1、Rotary air jointBefore installation, make sure that no foreign matter is mixed into the sealing surface.
    2. For connectors with inspection holes, please install them with the inspection holes facing downwards.
    3. When installing pipelines, avoid installing heavy objects such as valves on the rotary joint.
    4. In the case of threaded installation, the thread direction should be convenient for tightening (smooth) relative to the direction of rotation. The rotation direction of rollers, drums, etc., viewed from the installation direction of the rotary joint, should be：“Clockwise direction is left thread, counterclockwise direction is right thread”。
    5. Please use flexible pipes for the connection between the rotary joint and the piping section. Please avoid using steel pipes for direct pipe installation so that the joints are restrained.
    6、Rotary air jointWhen stopping rotation, please only stop the rotation of the joint and do not impose other restrictions.
    7. Under the highest operating pressure conditions, please avoid using the highest speed.     8. When used under high temperature conditions, if the bearing uses a ball bearing, grease must be supplied. If it exceeds a certain time (which varies depending on the frequency of use), lubrication must be performed.
    9. When applying grease, please remove the plug to apply grease.
    10. Please do not leave it for a long time when it is stopped. Otherwise, rust, etc. may occur, causing fluid leakage.
    11. For joints with inspection holes, if fluid leaks from the inspection holes, it is time to replace them.
    12. In case of failure, please repair or repair it in timeRotary air jointReplace with new products
    Please do not continue to operate when fluid leakage occurs, otherwise it may cause a serious accident. Installation and use in strict accordance with the installation and use precautions of the rotary joint can not only extend the service life of the rotary joint, improve economic benefits, but also ensure safe production.
    Dongguan Oubaibo Technology Co., Ltd. [13826981112] has been committed to the production and manufacturing of high-end slip rings. It is a well-known domestic professional manufacturer integrating R&D, production and sales of conductive slip rings. The company mainly produces slip rings, pneumatic slip rings, electric slip rings, cap-type slip rings, pneumatic-electric slip rings, hollow slip rings, conductive slip rings, pneumatic slip rings, cap-type conductive slip rings, slip rings conductive rings, through-hole electrical slip rings Slip rings, rotary pneumatic joints, rotary conductive slip rings, and other pneumatic rotary joints, welcome to inquire!